The Cobra FLY-Z driver features ‘FLIPZONE’ weighting technology so that you can change the flight of your driver without adjusting the loft.
‘FLIPZONE’ weighting technology allows you to change the centre of gravity from low front weighting to back low weighting. With just a couple of turns of the torque wrench you can drastically improve your distance and golf ball flight.
The Cobra FLY-Z driver is packed with lots of other game changing technologies that will give you the edge over your fellow golfers. Cobra’s ethos behind the FLY-Z driver is that a lot of golfers are using the wrong driver and changing their swings to suit their drivers. With the Cobra FLY-Z driver they have produced a driver that it totally adaptive to your swing, so there are going to be no excuses for not hitting more fairways.
A breakdown of all the Cobra FLY-Z driver technologies are listed below. Once you add all of these together you will have a driver that gets you further down the middle of the fairway than ever before.
Product Features
- Speed Channel Face - Surrounds the whole face to help minimise face thickness and produce incredible ball speeds across the whole face for extra distance
- Forged E9 Zone Face Weighting - Allows for weight to be removed from the face and hosel for an increased sweet spot size and better more consistent ball speeds on off centre hits
- Crown Zone Weighting - Allows for weight to be removed from the crown and repositioned low and deep in the head for a lower deeper centre of gravity to aid in stability and forgiveness on off centre hits
- Multi-Material Construction with Next-Generation T.O.P Technology - A new thin Titanium body structure and carbon fibre crown and sole pieces allow better weight distribution in the head for maximum distance and forgiveness
- MYFLY8 Smartpad - Lets you select from eight loft settings to maximise and manage distance and trajectory without adjusting the face angle
- FLIPZONE Weight Technology - Is a movable weight that will give you two distinctly different flight paths by altering the centre of gravity for a low or high flight path
Specifications:
Model
|
Loft/Trajectory Settings
|
Length |
Swing Weight
|
Head Volume
|
Stock Flex
|
Hand
|
Fly-Z Driver |
8.5° / 9.0° / 9.0° Draw /
10° /10° Draw / 11° / 11° Draw / 11.5°*
|
45.00"
|
D4
|
455cc |
X, S, R |
RH/LH |
Shaft: MATRIX VLCT ST
Model
|
Flex
|
Shaft Graphics Weight
|
Actual Shafts Weight
|
Kick Point
|
Torque
|
Tip Diameter
|
Matrix VLCT ST |
R
|
65g
|
63g
|
Mid |
4.0 |
0.335 |
Matrix VLCT ST |
S
|
65g |
65g |
High |
4.0 |
0.335 |
Matrix VLCT ST
|
X
|
70g |
66g |
High |
4.0 |
0.335 |
Grips: COBRA FLY-Z LAMKIN 3GEN CROSSLINE