Mizuno T24 Tour Raw Wedge

Grain Flow Forged – Craftsman refined Teardrop
Our craftsman’s re-work of Mizuno’s prolific T-Series wedge, with subtle top-line refinements visible from the playing position. Grain Flow Forged in Hiroshima Japan, to ensure precise shaping and an unrivalled touch around the green. Now with a higher spinning QUADCUT+ groove and five unique sole profiles.

“The new QUADCUT+ Groove came from the realisation that an adjustment to the camber of the groove shoulder and the taper of the groove profile would create an opportunity to move our grooves closer together – resulting in more spin.” - DAVID LLEWELLYN – DIRECTOR OF R&D

FORGED IN HIROSHIMA JAPAN
One-piece Grain Flow Forged HD Boron in Hiroshima, Japan – where Mizuno irons have been produced since 1968.

CRAFTSMAN REFINED TOPLINE
Mass taken from the toe portion, and a lower hosel blend creates a smaller profile without loss of effective hitting area.

WRAP-AROUND SOLE RELIEF
Increased sole relief to heel and toe across all 5 grind options.

SPIN-WEIGHTED BLADE DESIGN
A flared upper portion of the blade creates higher spin and penetrating trajectory – particularly from strikes high on the clubface.

QUADCUT+ GROOVE
An adjustment of the groove shoulder camber and the taper of the groove profile allows a tighter groove pattern for increased spin rates on all shots.

WET WEATHER PERFORMANCE
Mizuno's HydroFlow Micro Grooves are laser etched to release moisture and reduce spin drop-off.

LOFT SPECIFIC PROFILE
Straight leading edge on lower lofts (to 51), into traditional teardrop, and more rounded lob wedges (58 and above).

THREE FINISH OPTIONS
Soft White Satin (with copper underlay), Denim Copper and Tour Raw.

“The new V sole profile was the result of scanning our tour player’s personal grinds and seeing the amount now playing a higher bounce wedge with very aggressive trailing edge, heel and toe relief.” - CHRIS VOSHALL – DIRECTOR OF PRODUCT

Sole Profile:

S-Grind	High bounce with limited relief.  For full shots.
D-Grind	Mid bounce with moderate relief for gentle manipulation.
C-Grind	Mid / high bounce with generous relief for across a wide range of players / conditions.
X-Grind	Low bounce with aggressive relief for versatility and shallow attack angle.
V-Grind	High bounce with aggressive relief for versatility and steeper attack angle.

SPECIFICATIONS:

T24 Pitching Wedges Specifications

 

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
46/08	46	63	35.5″	35.75″	8	S
48/10	48	63	35.5″	35.75″	10	S

Dexterity: RH Only

T24 Gap Wedges Specifications

 

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
50/08	50	63	35.25″	35.5″	8	S
52/10	52	63	35.25″	35.5″	10	S

Dexterity: RH only

T24 Sand Wedges Specifications

 

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
54/08	54	63	35.25″	35.5″	8	D
54/10	54	63	35.25″	35.5″	10	S
56/06	56	63	35.25″	35.5″	6	C
56/08	56	63	35.25″	35.5″	8	V
56/10	56	63	35.25″	35.5″	10	D
56/12	56	63	35.25″	35.5″	12	S

Dexterity: RH only

T24 Lob Wedges Specifications

 

Club #	Loft °	Lie Angle	UN Length	60° Length	Bounce	Profile
58/04	58	63	35.25″	35.5″	4	X
58/08	58	63	35.25″	35.5″	8	C
58/10	58	63	35.25″	35.5″	10	V
58/12	58	63	35.25″	35.5″	12	D
60/06	60	63	35.25″	35.5″	6	X
60/10	60	63	35.25″	35.5″	10	C
60/12	60	63	35.25″	35.5″	12	V

Dexterity: RH only