Pursuing the Best Balance of Increased Speed and Forgiveness
Maximum Distance Performance can never be achieved if you increase Speed. To raise the overall Performance level, a combination of "Distance and Forgiveness" is required.
Instantly generate repulsion for more speed. Increase gear effect on off-center hits and correct trajectory.
RADIAL FACE
The increased repulsion coupled with an expanded repulsion area on the face boost ball speed.ace boost ball speed. The radial face minimizes power loss and delivers high initial velocity; even on off-center hits and especially at the bottom of the face.
KEEL DESIGN
Draw-biased design achieved by placing a tungsten weight at the rear heel side delivers added forgiveness and assists true striking.
P-SAT Precision Spine Control
The spine is set at six o'clock on all clubs to stabilize shaft movement and retain consistency through the set.
NON-ROTATING SYSTEM
The HONMA original system enables to adjust lie, loft, and face angle without rotating or detaching the shaft, by using attached torque wrench. The angle adjustment system provides the consistent shaft performance in combination with P-SAT, even if changing the angles.
SPEEDTUNED 55 SHAFT
The midpoint of the shaft flexes perfectly to generate a faster swing speed. This speed is efficiently transmitted to the ball through a more rigid tip and produces fast initial velocity.
SPECIFICATIONS
| LOFT (DEG.) |
9.5 |
10.5 |
11.5 |
| HEAD MATERIAL |
BODY & FACE : Ti811/CASTING FACE : Ti6-4/ROLLING |
| LENGTH (INCH) |
45.5 |
| HEAD VOLUME (cm3) |
460 |
| LIE ANGLE (DEG.) |
59.5 |
| SWING WEIGHT / TOTAL WEIGHT (G) |
| SPEEDTUNED 55 |
R |
※ |
D1/292 |
D1/292 |
| SR |
D1/293.5 |
D1/293.5 |
※ |
| S |
D1.5/295 |
D1.5/295 |
※ |
